'srv'에 해당되는 글 1건


일팬  팔어먹은지 얼마 되지도 않았구만.....   또하나 나의 눈에 밟히는 것이 있었으니 ....

바로 SRV 시리즈들이다.   

된장!!  그전에는 눈도 안가더니 갑작스레 왜 이렇게 눈이 가는지 ...... 그 낡아 보이는 모습이 맘에 들고  

저놈 사면 왠지 오래쓸거라는
자기 최면이 .....ㅋㅋ

일단 SRV 시리즈는  다들 알다 시피  펜더에서 나오는게 있고 국산 덱스터에서 만드는게 있다.   

그리고 하나의 강자가 또 있었으니 바로 ESP 에드워즈 제품이다~~

먼저 국산 덱스터




나름대로 열심히 만들어 놓았음을 알 수 있다.  헤드부의 담배빵까지 구현을 해놓긴 했는데 ....



약간 어설퍼 보이긴 한다.   

다음은 펜더 .... 펜더는  정통성이 있긴하나 .....넘 깨끗해.......ㅋㅋ



이건 너무 깨끗해서 SRV 같지가 않다.   기냥 사포질을 하고 담배빵을 먹이지 않는 이상은......ㅋㅋ

그러나 .....마스터 빌더에 의해 만들어진 SRV도 있다.  이건 거의 유사하게 만들어 놓았다.

이야기를 들어보면 실제 SRV를 가져다가 정밀 조사를 하고 만들었다고 한다 . 근데 펜더 홈피에도 없고 ....

자료가 많지는 않다.
SRV 글자반 빼면 진짜라 해도 믿을 듯.....ㅋㅋ



자~  그럼 이번에 업어온 에드워즈 SRV ~~~    일본웹에 나와 있는 자료를 보면



SRV 글자 없는 것만 그렇지 비슷하게 만들긴 했다.


근데 펜더가 아니다 보니 넥이 그닥 곡률이 없다.   연주에는 편한데  그래도 뭔가 섭섭하다....


본넛이고 슈퍼스트랫넥 같은 느낌이 많이 든다 .

 연주는 편하다.  바디도 레릭이라 그런지 오래된 친구같고 몸에 닿는 느낌이 좋다   외형과는 달리 잘만든 기타라는
 
느낌이 강하게
다가온다.  톤도 펜더 아메리칸 스탠다드 보다는 좀더 상위로 느껴진다.  탱글한 클린도 좋고  게인도
 
싱글 특유의 게인맛을 풍겨준다.
크런치야 말할 것도 없고~~

그밖에 파트들도 에이징된 색상이라 재미는 있는데 헤드에 담배빵은 없다.   담배빵을 만들려니 차마....엄두가

안난다.....ㅋㅋ

아직 셋팅을 좀더 해야 하고 SRV 곡은 다까먹었는지라 샘플은 못올리는데 OD808 킷트 하나 만들고 나며 샘플

올려볼려고 한다.

참조로 SRV 관련 내용을 보면

The Guitar
Quick Overview

 
 

Brand/Model

  Fender Stratocaster

Year

1959 - 1962 - 1963 See neck, body & pickups for clarification

Neck

1962 D shaped Maple neck, fattest neck Fender made. Replaced in 1990

Fingerboard

Rosewood Veneer, compound radius flatter than standard 7.25". Radius flatness due to refret work

Frets/Nut

Jumbo size Fretwire, NOT bass frets as rumored, Nut replaced with Fender style made of bone

Body

1963 Solid Alder wood

Color

3-color sunburst front and back

Pickups

Fender 3-single coil 1959 (which is why Stevie thought the guitar was a '59 model)

Bridge-Tremolo

'Left handed steel Fender Synchronized Tremolo, Gold plated hardware added in 1986. Stevie used 5 springs

Misc Notes

• The headstodck on #1's original neck had been damaged by Stevie himself. He had attempted to recreate a trick he saw his brother do by bouncing the guitar off the wall and catching it. The headstock split when Stevie attempted this. The headstock was taped up and later repaired.

• The fingerboard had worn down due to the number of refret jobs over the years. According to the Fender® Custom Shop, upon examination of #1, the neck had been repaird after it was damaged in an accident while on tour. The original neck was replaced with a neck from one of Stevie's other guitars, and then later by a neck from Fender. The original neck was put back on after Stevie's death.

• There is a hole that was patched on the right side of the bridge/tremolo plate. This is either a mistake created when attempting to install the left handed tremolo or this is the hole that will be left as the left handed tremolo arm is now located on the left side of the bridge/tremolo plate.

•Stevie used very heavy gauge strings and his set-up had the string action very high. This combinded with the large fretwire gave Stevie his signature guitar tone.

• The stickers for the block SRV letters and the Custom sticker were items Stevie would find at truck stops.

• Stevie's guitar tech would use heat shrink electrical tubing to reinforce the strings where they cross the bridge plate and travel through the body. This was a point of the greatest friction and caused strings to break. So the tubing helped allieviate the friction.

• Stevie's pickups were sheilded and there is also information stating there was a dummy coil installed to help with ground buzzing, which single coil pickups are prone to.

More notes to come...

 

 

 

  


'Music Equipmet > Guitar' 카테고리의 다른 글

Kramer Striker FR424SM  (0) 2011.10.21
Ibanez RG-450 MMH  (0) 2011.10.21
Epiphone Wine Red  (0) 2011.10.21
Japan Fender ST57-58US  (0) 2011.10.21
Ibanez JEM White  (0) 2011.10.21
Posted by tomoday1
,